QiangBao® Tire Sealant Pump
QiangBao® Tire Sealant Pump

The QiangBao® Tire Sealant Pump is the best way to pre-install all of your non-highway vehicles with tire sealant!

Usage pump ↓
1. Position valve core in upper half of tire. (If there’s any sealant in the tire)
2. Remove valve core with tool in cap and fully deflate the tire.
3. Remove object if there’s any.
4. Install the pump into the barrel tightly, connect to the tire valve.
5. Pump the sealant into tire till suggested volume.
6. Clean up the valve, reinstall/replace the valve core and inflate the tire.
7. Drive. Stop. Verify seal and check pressure.