350ml to 1000ml come with tube and valve cap, 130ml and 250ml come with tube only.
bottle manual (1)
1. Position valve core in upper half of tire. (with valve stem at 3 to 9 o’ clock position)
2. Remove valve core with valve cap and fully deflate the tire.
3. Remove objects if there’s any.
bottle manual (2)
4. Invert the bottle and shake the bottle up and down for 30 sec. and remove the seal film completely.
bottle manual (3)
5. Attach the tube to the valve stem using the pipe and squeeze in the sealant till suggested volume.
bottle manual (4)
6. Clean up the valve, reinstall the valve core and inflate the tire to standard tire pressure.
7. Drive. Stop. Verify seal and check pressure.