Instruction Manuals ⇓
Warnings be read before using Tire Sealant
- Must shake this sealant evenly up & down before application.
- Do not mix with any other self-sealing agent or water.
- This sealant must be prefilled into the tire before the punctures.
- If you want to use this product after puncture, you have to spot the puncture and rotate tire or move car to position puncture at lower half of tire ( with puncture at 6 o’ clock position), then squeeze this sealant into tire and inflate tire with air pump.
- This sealant will not seal punctures outside the tread area or seal a hole made by tools like a roughen rasp.
- This tire sealant is a temporary repair when used in passenger buses with tube tires, please inspect tires regularly & seek an immediate professional repair when you find any puncture or perforating objects.
- This tire sealant will remain liquid which may result in imbalance or vibration. If vibration occurs, slow down and seek an immediate professional repair. (Balance test indicates vehicle speed shall not exceeds 100km/h)
- Eye protection must be worn during installation.
- This product may affect the reading accuracy of tire built-in TPMS.
- Apply this sealant to old and low quality tires or tires with unmatched inner tube will affect sealing performance.
- This Sealant might be harmful if swallowed, Keep out of reach of children.
User Manual for Aerosole Tire Inflator
USAGE ↓
- Rotate puncture to 6 o' clock position.
- With Can upside down, shake Can for 30 sec. Do not remove puncturing object.
- Attach nozzle to valve.
- Keep Can upside down, take off button cap and press the button.
- Infuse aerosol inflator into tire until can is empty and rim is off the ground.
- Remove the nozzle quickly and drive for 2-3km to distribute sealant.
READ ALL CAUTIONS BEFORE USE ↓
- Use only as directed. This product is a TEMPORARY repair. Have tire inspected and repaired by a tire care professional as soon as possible to ensure safety and proper cleaning of tire pressure sensor, if so equipped. We recommend treated tire be repaired within 3 days or 100 miles after use of our product.
- Do not overinflate. Add additional air if necessary. Do not use on any vehicle with less than four tires. If used in "Z-rated" tires, be sure to check tire pressure before driving.
- This product will not repair valve leaks, sidewall punctures or punctures larger than 3mm. This product will not repair a tire that is separated from the rim.
- Keep far away from exhaust pipe when using.
STORAGE ↓
- Store can in trunk or spare tire wheel well or other cool and dry place. Do not store in vehicle interior or direct sunlight. Do not expose to heat or store at temperatures above 120°F (50°C).
PROFESSIONAL REPAIR INSTRUCTIONS ↓
- Inform tire repair specialist that tire inflator was used in tire and share warnings listed on this can.
- Do not weld or attempt repair without first removing tire from rim. Never inflate tire with pure oxygen.
- Failure to follow recommendations could result in injury and/or explosion. Expel gas in well-ventilated area before discarding.
DISPOSAL ↓
- This Product is a single-use product. Use and dispose of in accordance with state, local and federal laws and regulations.
- Do not puncture or incinerate can even after use.
- Do not place can in household trash compactor. Please recycle when empty.
WARNING ↓
- Contains gas under pressure; may burst if heated. Keep away from heat, sparks, open flames and hot surfaces.
- No smoking. May be fatal if swallowed and enters airways.
- If medical advice is needed, have product container or label at hand. Keep out of reach of children.
- Read label before use.
- IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting.
- Store locked up. Dispose of contents/container in accordance with all applicable regulations.
- Pressurized container: protect from sunlight and do not expose to temperatures exceeding 120°F(50°C).
- Do not pierce or burn, even after use. Solvent naphta (petroleum), heavy arom.
Install Instructions for 130ml~1000ml QiangBao® Tire Sealant
350ml to 1000ml come with tube and valve cap, 130ml and 250ml come with tube only.
1. Position valve core in upper half of tire. (with valve stem at 3 to 9 o’ clock position)
2. Remove valve core with valve cap and fully deflate the tire.
3. Remove objects if there's any.
2. Remove valve core with valve cap and fully deflate the tire.
3. Remove objects if there's any.
4. Invert the bottle and shake the bottle up and down for 30 sec. and remove the seal film completely.
5. Attach the tube to the valve stem using the pipe and squeeze in the sealant till suggested volume.
6. Clean up the valve, reinstall the valve core and inflate the tire to standard tire pressure.
7. Drive. Stop. Verify seal and check pressure.
7. Drive. Stop. Verify seal and check pressure.
Install Instruction for 4L SPECIAL Formula seal up to 38mm
1. Position valve core in upper half of tire. (with valve stem at the 3:00 or 9:00 position)
2. Remove valve core with tool in cap and fully deflate the tire, Remove object if there's any.
3. Invert and shake the sealant bottle evenly up and down for 30 sec., then remove the seal film.
4. Open a 2-3mm wide gap from bead area using a tire lever, pour sealant in the tire till suggested volum.
5. Close the gap.
6. Clean up the tire bead and rim, reinstall the valve core and inflate the tire.
7. Drive. Stop. Verify seal and check pressure.
Install Instruction for 4L QiangBao® Tire Sealant
1. Position valve core in upper half of tire. (with valve stem at the 3:00 or 9:00 position)
2. Remove valve core with tool in cap and fully deflate the tire, Remove object if there's any.
2. Remove valve core with tool in cap and fully deflate the tire, Remove object if there's any.
3. Invert and shake the sealant bottle evenly up and down for 30 sec., then remove the seal film.
4. Install the mini-pump into the bottle tightly, connect pump hose to the tire valve.
5. Pump the sealant into tire till suggested volume.
5. Pump the sealant into tire till suggested volume.
6. Clean up the valve, reinstall/replace the valve core and inflate the tire.
7. Drive. Stop. Verify seal and check pressure.
7. Drive. Stop. Verify seal and check pressure.
Install Instruction for 25L tire sealant in barrel
1. Position valve core in upper half of tire. (with valve stem at the 3:00 or 9:00 position)
2. Remove valve core with tool in cap and fully deflate the tire.
3. Remove object if there's any.
4. Using hand mixer to mix the tire sealant in the barrel evenly.
5. Install the pump into the barrel tightly, connect pump hose to the tire valve.
6. Pump the sealant into tire till suggested volume. (One down stroke of hand pump delivers 450ml of sealant, volume can be adjusted)
7. Clean up the valve, reinstall/replace the valve core and inflate the tire.
8. Drive. Stop. Verify seal and check pressure.
How to use Tire Repair Kit 3 in 1?
Proper Use:
- Remove any puncturing objects.
- Insert rasp tool into hole and slide up and down to roughen and clean inside of hole.
- Remove plug material from protective backing and Insert Into eye of needle.
- Insert with plug centered in the eye of the needle into puncture until plug is pushed approximately 2/3 of the way in.
- Pull needle straight out with a rapid motion, do not twist needle while pulling out.
- Cut off excess plug material flush with the tire tread.
- Re-inflate tire to recommended pressure and test for air leaks by applying a few drops of soapy water to plugged area. If bubbles appear, repeat the process.
WARNING:
- This repair kit is only suitable emergency tire repairs to enable vehicles to be driven to a service center where proper repairs can be made to the tire.
- Not intended for use fur major tire damage.
- Radial ply passenger car tires may only be repaired in the tread area. No repairs are permitted on the bead, sidewall, or shoulder area of the tire.
- Extreme caution should be used while using tools to prevent injury; Eye protection should be worn while repairing tire.